Precision cut, 11 hole pickguards. Manufactured to exacting standards from high quality material.
These are superior quality scratchplates with screening foil bonded to the reverse surface around the control section and offer SUPERB value for money.
From £12.00
SPST01: S-Style SSS Scratchplates
Fender, Stratocaster, Telecaster are registered trademarks of Fender Music Corporation. Gibson, and Les Paul are registered trademarks of Gibson Music Corporation.
Axetec is not affiliated with these manufacturers in any way.
Place your order on-line or by phone
01539 755015
From £12.00
£12.00
SPST02: S-Style HSS Scratchplates
SPST03: S-Style HH Scratchplates
S-Style Pickup covers in two sizes:-
50mm between centre of outside pole pieces ("E" string to "E" string)
52mm between centre of outside pole pieces ("E" string to "E" string)
Tip:
Your guitar will probably have a mixture of the two different sizes. Most have 2 x 50mm and 1 x 52mm - but not all. You really need to measure all 3 pickups to be sure.
£1.00
Cut for 3 x single-coil (SSS) pickups.
Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.
See bottom of page for screws / knobs etc.
Tip: "3-Ply" and "Black/White/Black" refer to the material being a sandwich of 3 layers. In this case black, then a middle layer of white, and finally a third layer of black.
When the scratchplate is cut with the usual chamfered egde, this gives the distinctive thin white line running around the outside.
Click on the small picture to the right for a visual example.
So, if you're looking for a black scratchplate with a thin white line around the edge, select "Black/White/Black"
Sorry to go on, but these terms cause no end of confusion!
Cut for 1 x humbucker & 2 x single-coil (HSS) pickups.
Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.
See bottom of page for screws / knobs etc.
Tip: "3-Ply" and "Black/White/Black" refer to the material being a sandwich of 3 layers. In this case black, then a middle layer of white, and finally a third layer of black.
When the scratchplate is cut with the usual chamfered egde, this gives the distinctive thin white line running around the outside.
Click on the small picture to the right for a visual example.
So, if you're looking for a black scratchplate with a thin white line around the edge, select "Black/White/Black" Sorry to go on, but these terms cause no end of confusion!
Cut for 2 x humbucker (HH) pickups - covered or open-coil. Routed for 1 Vol + 1 Tone control.
Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.
Tip: "3-Ply" and "Black/White/Black" refer to the material being a sandwich of 3 layers. In this case black, then a middle layer of white, and finally a third layer of black.
When the scratchplate is cut with the usual chamfered egde, this gives the distinctive thin white line running around the outside.
Click on the small picture to the right for a visual example.
So, if you're looking for a black scratchplate with a thin white line around the edge, select "Black/White/Black" Sorry to go on, but these terms cause no end of confusion!
£ >
Quality pickguard screws in a choice of 3 finishes.
Sold in packs of 11, 25 or 50
Quality guitar spares, parts & pickups at the best prices!
Guitar Parts UK - Pickups, Parts & Accessories
Tip:
These scratchplates are offered in 2 size profiles:-
- US STANDARD for US & Mexican made guitars
- IMPORT for instruments made in Korea, China etc.
They should drop straight in as a direct replacement, but if you're concerned about exact sizes and screw hole positions, click on the Key Dimension Indicator link for more details.
Squier Affiniity Series: Please note that these guitars have a slightly unusual sized scratchplate. The US STANDARD profile fits a little better than the IMPORT profile but requires slight adjustment of a few screw holes.
£12.00
SPST04: S-Style SSS Scratchplates - LEFTY
LEFT HANDED scratchplates, cut for 3 x single-coil (SSS) pickups. Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.
£12.00
SPST05: S-Style HH Scratchplates
Cut for 2 x OPEN-COIL humbuckers (HH) pickups. (Please note that if you wish to use covered humbuckers with this scratchplate, the pichip holes will need to be "eased" out a little with a file.)
Precision, 11 hole, 3-Ply pickguards with shielding for control area and pickups bonded to the reverse surface.
Routed for 1 Vol + 2 Tone controls.
Also available in White/Black/White (not pictured).
£12.95
SPST06: S-Style HSH Scratchplates
Cut for 2 x humbuckers (HSH) and one single-coil pickups.
Precision, 11 hole, 3-Ply pickguards with shielding for control area and pickups bonded to the reverse surface.
Routed for 1 Vol + 1 Tone controls. Supplied in US PROFILE only.
KNB005: S-Style Knob
£2.00
The king of all knobs! Choice of 3 colours.
Sold in sets of three, 1 Volume, 2 Tones.
White
Ivory
These knobs fit all of our PT0001, PT0002, PT0003 and PTSW01 potentiometers.
They are suitable for pots with 6mm splined actuator shafts.
Items:
Total:
